HDD se SSD clone fail ho gaya hai? Windows boot nahi ho raha ya error aa raha hai? Clone fail hone ke sabse common reasons aur unke 100% working fixes – simple Hinglish, practical guide.
Introduction
SSD me Windows clone karte waqt
jab process fail ho jaye
to aadmi ka mood hi kharab ho jata hai.
Screen pe error
ya clone complete hone ke baad
Windows boot hi nahi hota.
Par ek baat clear samajh lo
clone fail hona normal problem hai,
aur 90 percent cases me fix bhi ho jata hai.
Is article me
main wahi real problems cover karunga
jo ground level pe aati hain
aur unke actual working solutions bhi.
No theory
no over smart gyaan
sirf practical fixes.
Clone Fail Hone Ke Common Types
Sabse pehle ye samjho
clone kis stage pe fail ho raha hai.
Usually ye problems hoti hain:
- Clone process beech me stop ho jata hai
- Clone complete hota hai par Windows boot nahi hota
- SSD detect hoti hai par system start nahi hota
- Blue screen aa jata hai
- “No bootable device” error
Har case ka fix alag hota hai.
Problem 1: Clone Process Beech Me Fail Ho Jata Hai
Symptoms
- Percentage atak jata hai
- Software error dikha deta hai
- Clone cancel ho jata hai
Main Reasons
- HDD me bad sectors
- SSD faulty ya low quality
- USB to SATA cable loose
- Background me antivirus interference
Fix 1: HDD Health Check Karo
Clone se pehle
HDD ka basic health check zaruri hai.
Steps:
- Command Prompt open karo (Admin)
- Type karo
chkdsk c: /f /r - Restart hone do
Bad sectors thik ho jate hain
aur clone success chance badhta hai.
Fix 2: Antivirus Temporarily Disable Karo
Clone ke time:
- Antivirus disable karo
- Windows Defender real-time protection off karo
Clone complete hone ke baad
phir se enable kar dena.
Fix 3: USB Cable Change Karo
Agar SSD USB to SATA se connected hai:
- Cheap cable mat use karo
- Cable properly fit honi chahiye
- Desktop me ho to direct SATA connect better
Loose connection se clone fail hota hai.
Problem 2: Clone Complete Ho Gaya Par Windows Boot Nahi Ho Raha
Ye sabse common issue hai.
Symptoms
- Black screen
- Windows logo ke baad restart
- “Boot device not found”
Fix 1: HDD Disconnect Karna Mat Bhoolo
Clone ke baad agar:
- HDD + SSD dono connected hain
to system confuse ho jata hai.
Solution:
- PC shutdown karo
- HDD completely disconnect karo
- Sirf SSD laga ke boot karo
Isse 50 percent cases yahin fix ho jate hain.
Fix 2: Boot Priority Check Karo
BIOS me jao:
- Boot menu open karo
- SSD ko first boot pe set karo
- Save and exit
Kabhi kabhi clone sahi hota hai
par BIOS HDD ko priority deta rehta hai.
Problem 3: Legacy / UEFI Mode Mismatch
Ye problem beginners ko samajh nahi aati.
Samjho Simple Language Me
- Old HDD Legacy mode me installed thi
- SSD UEFI mode pe boot kar rahi hai
Is mismatch se Windows boot nahi hota.
Fix: BIOS Mode Same Rakho
BIOS me jaakar:
- Agar HDD Legacy thi → Legacy select karo
- Agar HDD UEFI thi → UEFI select karo
Clone source aur destination
dono ka mode same hona chahiye.
Problem 4: EFI / System Partition Clone Nahi Hua
Symptoms
- SSD pe Windows files hain
- Par boot error aa raha hai
Ye tab hota hai
jab clone ke time system reserved partition miss ho jata hai.
Fix: Windows Startup Repair
Steps:
- Windows bootable USB lagao
- Boot from USB
- Repair your computer
- Startup Repair
Most cases me EFI automatically rebuild ho jata hai.
Problem 5: Blue Screen After Clone
Reasons
- Old HDD driver conflict
- Storage controller issue
- SSD alignment problem
Fix 1: Safe Mode Try Karo
- Boot ke time F8 / Shift + Restart
- Safe Mode select karo
Agar safe mode chal gaya
to driver issue confirm hai.
Fix 2: Storage Driver Update Karo
Safe mode me:
- Device Manager open karo
- Storage controller update karo
- Restart
Problem 6: SSD Smaller Hai HDD Se
Situation
- HDD 500GB
- Used space 300GB
- SSD 240GB
Clone yahan fail hona normal hai.
Fix Options
Option 1:
- HDD se data delete karo
- Used space SSD se kam lao
Option 2:
- Bigger SSD use karo
Clone software koi magic nahi karta
space logically fit hona zaruri hai.
Problem 7: Clone Slow Ya Extremely Time Le Raha Hai
Reasons
- HDD slow
- USB 2.0 port
- Background programs running
Fix
- Laptop ko charger pe rakho
- Background apps close karo
- USB 3.0 port use karo
- Patience rakho
Old HDD me clone slow hi hota hai
ye normal hai.
Problem 8: SSD Boot Ho Gayi Par System Lag Kar Raha Hai
Reason
- Old HDD ke junk startup programs
- SSD properly optimize nahi
Fix
- Startup programs disable karo
- Windows update complete hone do
- SSD detect ho rahi hai ya nahi check karo
Windows 10/11 SSD detect karte hi
automatic optimization karta hai.
Kab Clone Chhod Ke Fresh Install Karna Better Hai
Sach bolu to
har system cloning ke layak nahi hota.
Fresh install better hai agar:
- Windows corrupt hai
- Virus issues hain
- Blue screen pehle se aa rahi thi
- System bohot unstable tha
Clone problem fix karne me
zyada time waste ho raha ho
to fresh install smart decision hota hai.
Real Life Experience
CSC aur cyber cafe setups me:
- 10 me se 2 clone fail hote hain
- Unme se 1 BIOS / boot issue hota hai
- 1 HDD bad sector issue
Proper diagnosis se
almost har clone recover ho jata hai.
Common Mistakes Jo Log Karte Hain
- Clone ke baad HDD nahi nikalte
- BIOS mode ignore kar dete hain
- Cheap SSD use kar lete hain
- Backup nahi banate
Inse problems badhti hain.
Quick Checklist – Clone Fix Karne Se Pehle
- HDD health ok hai?
- SSD size enough hai?
- BIOS mode same hai?
- HDD disconnected hai?
- Boot priority SSD pe hai?
Is checklist se
90 percent issues solve ho jate hain.
Conclusion
Clone fail ho jana
koi badi baat nahi hai.
Zyada tar cases me
problem cloning software ki nahi
settings aur small mistakes ki hoti hai.
Thoda patience
aur sahi step follow kar lo
to HDD se SSD clone
successfully boot ho jata hai.
Aur haan
agar system pehle se hi problematic tha
to fresh install se behtar kuch nahi.
SSD lagne ke baad
system ka experience
bilkul naya lagta hai
chahe laptop kitna hi purana ho.